Features Of Components For Rental LED Display

- Sep 14, 2017-

    Rear cover: Remove 4 screws, remove the rear cover, you can maintain and replace the power supply and receiving card; Heatsink: The use of aluminum backplane instead of the traditional plastic bottom shell, in order to ensure the smoothness of the same time, improve the product cooling performance; IC and drive: High refresh frequency, high gray level refresh frequency Rental LED Display

    High-gray 16,384-level gray products using built-in PWM high-end constant-current driver chip. In the case of single receiving cassette, the display can be minimized to 960HZ, up to 4800HZ. The highest gray level up to 16bit, smooth screen, can easily meet the stage performance, broadcast and other high-end application requirements. DC power line using the United States standard wire, power input using the table socket, the power cord is not easy to loose, the power transmission process of the minimum loss, the input voltage stability.Rental LED Display

    Capacity: New structural design, meet the requirements of hoisting, overlap, to meet indoor and outdoor requirements. Box single, a variety of point-distance compatibility, indoor and outdoor modules compatible; High: High grayscale high refresh rate design, gray level of the bit, refresh frequency >960hz; Low: Excellent thermal design and thermal performance, can not need external fans, air-conditioning, low noise, the box weight is light, the required installation costs are low; Save operating costs.Rental LED Display

    Waterproof effect is good, have IP65 protection grade, suitable for outdoor leasing use, equipped with various specifications of the air box, convenient for storage and transportation of box, and LED display has played a very good protective role. According to customer requirements and on-site environment, tailored to the most suitable LED display leasing solutions.Rental LED Display

     LED (Light emitting diode), a light-emitting diode, is a solid-state semiconductor device that converts electricity directly to light. The heart of the LED is a semiconductor chip, one end of the chip is attached to a bracket, the other end is the negative electrode, the other end is connected with the cathode of the power supply, so that the whole wafer is encapsulated by epoxy resin.Rental LED Display

     The semiconductor chip consists of two parts, one part is the P-type semiconductor, the hole in it occupies the dominant position, the other end is the N-type semiconductor, here mainly is the electron. But when these two semiconductors are connected, they form a "n knot". When the current is acting on the chip through the wire, the electrons are pushed to the P area, where the electrons are combined with the holes in the P area, and then the energy is emitted in the form of photons, which is the principle of LED luminescence. The wavelength of light determines the color of the light, which is determined by the formation of N junction materials.Rental LED Display

Previous:Technical Requirements Of LED Colorful Display Next:Internal Construction Of Transparent LED Display