P3.8 P4 P5 P6 P8 P10 P16 Back Access Outdoor LED Display with Iron and Die-Casting Aluminum Cabinet

P3.8 P4 P5 P6 P8 P10 P16 Back Access Outdoor LED Display with Iron and Die-Casting Aluminum Cabinet

1.High transparency rate. 2.Light weight. 3.Fast installation. 4.Low poawer consumption.

Product Details

Our company's strong R&D and design capabilities can fully meet the needs of our customers and provide reliable and high-quality Fixed indoor LED display, Small Pixel LED Display, P10 Outdoor Transparent LED Display Screen. We take the market as the guidance, science and technology as the driving force, striving to provide the best products and services to customers. We have gradually established a good people-oriented employment mechanism, which not only re-uses talents in our work, but also enables them to experience the company's respect and care for talents in all aspects. Our product sales and service are normalized and the product sales chain and service network are densely distributed. The company seeks sincere cooperation in a wide range of fields to improve the overall strength of the company.

p5-8mm outdoor transparent led screen.


p5-8 led dispaly.


p5-8 transparent led screen


FAQ:

How to solve the problem of display black screen?

   In control system used in the process, we occasionally meet the LED display, the phenomenon of the black screen.The same kind of phenomenon may be caused by different reasons, even display blackening process will vary due to different operation or due to the different environment.Such as it may be a moment of electricity is black, may also be black in the loading process, also can be in after sending black and so on.You may refer to encounter this kind of phenomenon, please note the following aspects to judge "failure"

1.Please make sure all hardware, including control system, is all right to electricity.(+ 5 v, don't pick up the, wrong)

2.Check and double-check the serial port of the used to connect to the controller for loose or falls off phenomenon.(if the black in the loading process, probably because the reason is caused, namely in the process of communication was interrupted because of loose communication line, so the screen black. Don't think the screen body didn't move, line can not be loose, please to check, it is important for you want to quickly solve the problem.)

3.Check and confirm the connection of LED display screen and the distribution of the HUB board connected to the master card is close connections, whether against

4.Please check and confirm the connection between EQ control card and distribution HUB board 50 core wire for loose or plugged into the phenomenon

5.If you display interface definition and the HUB board provided does not match will appear black screen phenomenon, please check if there's any loose for your jumper again, open circuit or short circuit phenomenon. If you think that has put the ABCD signals such as one-to-one correspondence, please check the OE signal is connected correctly.(it is strongly recommended that the use and display interface definition matching HUB distribution board)



We take 'surpass ourselves and pursue excellence' as our foundation, continue to grow and develop, and create a legend in the P3.8 P4 P5 P6 P8 P10 P16 Back Access Outdoor LED Display with Iron and Die-Casting Aluminum Cabinet industry with quality and service. We hope that our company will continue to grow, build a competitive brand and promote our company's sustainable development. Your trust and approval are the best reward for our efforts.
Previous:P4mm Rubber Soft LED Module Advertising Video Flexible LED Screen Next:Dorna Servos, Servo Drive, Servo Motor on Sleeve Labeling Machines

Inquiry

You Might Also Like